| Product code | GF-PPF-PRINT-WH |
|---|---|
| What does this mean? The layers the film is made of: usually a TPU base, an adhesive and a protective top coat. | Printable base: TPU50µm; PSA30±2GSM; air-egress liner75µm. Overlaminate separate. |
| What does this mean? The total thickness of the film. Thicker PPF resists stone chips better; thinner is easier to fit. | Finished total not stated |
| What does this mean? How shiny the surface is, measured at a 60° angle. Higher means glossier; matte finishes are low. | >85 GU |
| What does this mean? How much pulling force the film takes before it tears. Higher means tougher. | >10 |
| What does this mean? How far the film stretches before it breaks. High numbers let it follow deep curves. | >150 |
| What does this mean? How the film holds up after long exposure to heat in the lab: colour, gloss and adhesion. | 80 °C / 24 h — pass |
| Surfaces | Vehicle paint |
| Other data | Durability 5 years with self-healing (vs vinyl 3 years, no self-healing) — Global's own comparison |
| What does this mean? The temperature and conditions needed for a good result when applying it. | 20–30 °C; dry application recommended |
| Storage | 20–30 °C, 50 % RH |
| Shelf life | 1 year |
